Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SAS drive to a SAS-enabled SATA controller at 6 Gb/s with included Molex power
This adapter cable links a 29-pin SFF-8482 SAS hard drive to a SAS-enabled SATA 7-pin host port on a motherboard or RAID card. It includes a 7-inch Molex 4-pin power tail so the drive receives both data and power from a single assembly. The 2.3 ft length suits typical chassis routing. Builders who need a second card or a different backplane connector cannot use this single-cable solution.
The blue cable jacket protects the 6 Gb/s signal path between the SFF-8482 device end and the SATA host end. A latching SATA connector resists accidental unplugging during drive swaps, while the Molex power plug locks into standard peripheral power sockets. No active electronics are present, so the adapter adds no latency or driver requirement. Installers who want a right-angle SATA head or a longer power lead will not find those variants here.
Passive copper conductors generate no heat of their own and produce zero audible noise. The drive draws its operating current through the Molex connection, so the host SATA port only carries signalling current. System power budget is therefore unchanged beyond the drive’s own consumption. Users who expect active signal boosting or temperature monitoring will not find those functions in this cable.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SFF8484TOSATA |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 3 |
| Size & build | |
| Overall length | 2.3 ft /70CM |
The cable supports data transfer rates up to SATA 3.0 at 6 Gbps.
It provides a 29-pin SFF-8482 device connector, a SATA 7-pin host connector, and a 7-inch Molex 4-pin power lead on a 2.3 ft (70 cm) data cable.
Plug the SATA end into a SAS-enabled SATA port, attach the SFF-8482 to the drive, and connect the Molex 4-pin power; the step often missed is powering the drive via the Molex lead.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?