Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 2.0 9-pin header to a USB 3.2 Type-E Key-A socket for front-panel USB-C at 480 Mbps
The EN-Labs adapter converts a motherboard USB 2.0 9-pin header into a USB 3.2 Type-E Key-A female socket. It allows a front-panel USB-C connector to be used on boards that only expose the older internal header. Builders adding a modern front-panel port to an older platform will find this the direct fit. The device is a passive interface adapter and requires no extra power or drivers.
As a passive wiring adapter it draws no additional power and generates no heat or noise of its own. The link operates at the USB 2.0 specification of 480 Mbps, so the electrical load matches the original header. Installation simply plugs into the existing 9-pin header; the compact body measures 0.65 by 0.25 by 1.2 inches and sits inside the case without affecting airflow.
This adapter replaces the need for a motherboard with a native USB 3.2 Type-E header when adding a USB-C front panel. The jump is worth it when the board only offers the 9-pin header and a case upgrade brings a Type-C port. It will not increase transfer speeds beyond 480 Mbps, so builders who need full USB 3.2 bandwidth must choose a different platform.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | USB A to USB C |
Power off the computer completely. Align the 9-pin male connector with the motherboard USB 2.0 header and press straight down until seated. The compact adapter measures 0.65x0.25x1.2 in, so verify case clearance first.
The adapter is a passive interface device with no moving parts or active components. It requires no scheduled maintenance or replacement under normal use.
The adapter operates at USB 2.0 specification, so sustained transfer speed is limited to 480Mbps regardless of the USB 3.2 Type-E Key-A output connector.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?