Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 5m Aqua Blue
5-metre OM3 duplex multimode patch cord with FC connectors, 3.0 mm jacket and ceramic ferrules for 10 Gbit links at 850 nm
- Supports 10 Gbit links with OM3 multimode core
- Low typical insertion loss of 0.2 dB for efficient signal transfer
- High return loss exceeding 38 dB reduces reflection
- 0 mm PVC jacket protects fibres in dense racks
- Rated for 1000 mating cycles and -20 °C to 60 °C operation
Enfain OM3 FC-FC Duplex Cable
The Enfain OM3 FC-FC duplex multimode fibre optic cable is built for short-reach 10 gigabit links inside data centres and server rooms. It suits network engineers and installers who need reliable patch connections between switches, servers or patch panels using FC connectors.
Sustained 10G transmission at 850 nm
The cable carries 10G traffic over a 3.0 mm jacket with a typical insertion loss of .2 dB and a maximum of .3 dB. Return loss exceeds 38 dB, while the 330 mm bending radius and 1000 mating cycles support dense rack routing and repeated re-patching without signal degradation.
Verify FC ports and OM3 compatibility
Confirm both endpoints accept FC connectors and are specified for OM3 multimode fibre before ordering. The operating temperature range of -20 °C to +60 °C covers standard indoor environments, but outdoor or extreme-temperature installations require a different cable type.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 66% of the 808 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Does the 3.0 mm PVC jacket and 330 mm bending radius make the cable stiff or hot when routed through a crowded rack all day?
The 3.0 mm jacket and 330 mm minimum bend radius are mechanical specs; the cable carries light at 850 nm and generates no heat of its own.
What connectors must my switch and server already have for this duplex FC-FC patch cord to plug straight in?
Both ends need FC sockets; the cord is duplex, so each device requires two FC ports — one for transmit and one for receive.
Will the OM3 10-gigabit core and 0.2 dB typical insertion loss work reliably with older 1 Gbit transceivers I still use?
Yes — the OM3 core is rated for 1 G, 10 G and 40 G, and the low insertion loss keeps the link budget comfortable for legacy 1 G modules.
More in Fiber Optic Patch Cables
Similar items
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
STARTECH 50FIBLCLC3 fibre optic cable 9.98 ft OM2 50/125 LC duplex
- Others
- Orange
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow










