Enfain OM3 LC-ST Duplex Multimode Fibre Optic Cable 15m Aqua Blue
A 15-metre aqua OM3 duplex patch cord with LC and ST ceramic ferrules, 3.0 mm PVC jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss for 10 GbE links
- Supports 10G, 40G and 1G networks with OM3 10-gigabit core
- Low typical insertion loss of .2dB and maximum .3dB for reliable links
- High return loss exceeding 38dB reduces signal reflection
- Durable 3.0mm PVC jacket withstands 1000 mating cycles
- Operates from -20°C to +60°C with 330mm minimum bend radius
Product Identity
The Enfain OM3 duplex multimode fibre cable carries 10 Gb/s signals over 15 metres using an 850 nm wavelength. It is built for data-centre, server and switch links that require OM3 bandwidth.
Pre-Installation Checks
Verify that both endpoints accept LC and ST connectors in a duplex arrangement. Confirm the link budget can tolerate up to .3 dB insertion loss and that the operating environment stays between -20 °C and +60 °C.
Build Integration
The 3.0 mm PVC jacket withstands 1000 mating cycles and a 330 mm bend radius for rack routing. Return loss exceeds 38 dB to protect upstream transceivers. Ceramic ferrules maintain alignment across repeated patch-panel changes.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Typical for this category: the median of 808 items is $29.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What connectors and length does the Enfain OM3 cable have, and is anything else needed to use it?
The cable has LC and ST duplex connectors and is 15 metres long. No extra parts are required; plug it into matching ports on your switch or server.
Which OM3 multimode version should I choose for 10G, 40G or 1G links?
The OM3 10-gigabit core supports 1G, 10G and 40G multimode connections at 850 nm, so this single version covers all three speeds.
What does the 0.2 dB typical insertion loss mean when the cable is installed?
At 850 nm the typical loss is 0.2 dB and the maximum is 0.3 dB, leaving ample margin for 10G and 40G links within the 15 metre run.
More in Fiber Optic Patch Cables
Similar items
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Cables To Go 01000 13.1ft LC-LC 50/125 OM4 Duplex fibre optic cable
- Connector 1: (1) LC…
- Satellite Radio Ant…
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Cables To Go 01002 20ft OM4 LC-LC 50/125 duplex multimode fibre optic cable
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
Belkin F2F402LL-03M-G 10 ft LC/LC Duplex Multimode Fibre Optic Cable 50/125 Aqua
- Others
- Aqua










