Enfain OM3 ST-ST Duplex Multimode Fiber Patch Cable 15m Aqua Blue
OM3 multimode duplex patch cable with ST connectors, 15 m length, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, >38 dB return loss
- Supports 10 Gb links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss preserves signal strength
- High >38 dB return loss cuts back-reflection
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C for data-centre use
Enfain OM3 Duplex Patch Cable 15m
This 15-metre duplex multimode patch cable uses an OM3 10-gigabit core with ST connectors on both ends. It operates at an 850 nm wavelength and is built for 1 G, 10 G and 40 G Ethernet links in switches, servers and data-centre racks.
Sustained 10G and 40G throughput
Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB. These figures stay stable over long runs, so the link keeps its error budget during continuous high-speed traffic rather than only in short bursts.
PVC jacket, ceramic ferrules, wide temperature range
The 3.0 mm PVC jacket protects the fibres and the ceramic ferrules withstand 1000 mating cycles. The cable is rated for an operating range of -20 °C to +60 °C and a minimum bending radius of 330 mm, so it handles normal rack routing without excess attenuation or mechanical fatigue.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $36.99
- Pricier than about 57% of the 808 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Does the 3.0 mm PVC jacket and 330 mm bend radius limit heat buildup when the 15 m cable runs continuously at 850 nm?
The cable operates from -20 °C to +60 °C with a 330 mm minimum bend radius, so normal rack routing will not cause heat-related degradation.
Which patch panels or switches must already have ST connectors to plug this duplex OM3 cord straight in?
Any device or panel with ST ports — such as legacy switches, servers or distribution frames — will accept the duplex ST connectors directly.
Will the 0.2 dB typical insertion loss at 850 nm cause errors on 1 Gbit links that share the same path?
Typical loss is 0.2 dB and maximum 0.3 dB at 850 nm, well within the margin for 1 Gbit and 10 Gbit multimode links.
More in Fiber Optic Patch Cables
Similar items
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Cables To Go 18575 OS2 fibre optic cable SC-SC 9/125 duplex single-mode PVC yellow 32.8 ft
- Cable Connectors
- Yellow
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Cables To Go 1004 8M LC-LC 50/125 OM4 duplex multimode PVC fibre optic cable aqua
- Others
- Aqua
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
Tripp Lite N368-25M fibre optic cable LC/ST 25 m 82 ft
- Others
- Yellow










