Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 50m Aqua Blue
A 50-metre OM3 duplex multimode patch cable with ST connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and 1000 mating cycles
- Supports 10 Gbps links with OM3 multimode core
- Low 0.2 dB typical insertion loss preserves signal strength
- High >38 dB return loss cuts back-reflection
- Durable 3.0 mm PVC jacket resists daily handling
- Rated for 1000 mating cycles and -20 °C to +60 °C operation
Enfain OM3 Duplex Multimode Fibre Cable
This 50 metre OM3 duplex multimode fibre optic cable uses ST connectors on both ends. It is built for 10 gigabit Ethernet links between switches, servers and patch panels in data-centre and enterprise racks. The aqua blue 3.0 mm PVC jacket identifies the OM3 grade at a glance. Installers who need a ready-made patch cord for short-reach multimode runs will find it suitable.
ST Connectors and 3.0 mm Jacket in a Rack Build
The duplex ST terminations plug directly into legacy ST ports on older switches or patch panels without adapters. A 3.0 mm outer diameter keeps the cable flexible enough for dense cable managers while protecting the fibres. The 330 mm minimum bend radius guides routing around tray corners. It frees up space by eliminating the need for separate pigtails and splice trays on short links.
Insertion Loss 0.2 dB Typical and 850 nm Operation
Typical insertion loss is 0.2 dB with a maximum of 0.3 dB, and return loss exceeds 38 dB at the 850 nm wavelength. The ceramic ferrules are rated for 1000 mating cycles, supporting repeated re-patching during maintenance. Operating temperature spans -20 °C to +60 °C, covering standard server-room and wiring-closet environments. Power draw and noise are not applicable to a passive fibre assembly.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $78.99
- Pricier than about 75% of the 808 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What is the maximum insertion loss at 850 nm over a 50 m run?
The maximum insertion loss is 0.3 dB at 850 nm, so a 50 m link stays within that budget.
Does the 3.0 mm PVC jacket stay flexible at the rated 60 °C operating limit?
The cable is rated for -20 °C to +60 °C, so the 3.0 mm jacket remains pliable at the top of that range.
Which connectors must the switch or server already have to use this cable?
The duplex patch cord terminates in ST connectors, so both ends need ST ports.
More in Fiber Optic Patch Cables
Similar items
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Belkin LCLC083-02M-TAA fibre optic cable 6.56 ft yellow
- Others
- Yellow
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Panduit FAP6WEIDLC fibre optic cable 6 LC Duplex OM1 Multimode 62
- LC
- Fiber
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
Cables To Go 01141 OM4 fibre optic cable LC-LC 50/125 duplex multimode 98.4 ft aqua
- Cable Connectors
- Black










