Enfain RJ45 to 8P 8-Core Solderless Network Ethernet Cable 0.3 m
Solderless RJ45 male to 8P terminal extends a Cat5e 8-core link by 0.3 m without tools
Style Male to Male
- Male to Male$13.99
- Female to Female$11.99
- Solderless RJ45 terminal avoids crimping tools
- Eight-core straight cable carries full Ethernet signal
- 3 m length suits tight patch panels
- Screw-fixed connector secures link without welding
- Cat 5/8P wiring fits standard RJ45 mother sockets
Purpose-built connector
This Enfain cable provides a straight RJ45 male plug to an 8P solderless terminal. It serves installers who need to extend or repair a Cat5 8-core link without crimping tools. The 0.3 m length keeps the run tidy inside enclosures or patch panels.
Ideal for tool-free termination
Technicians working on RJ45 mother-socket equipment can screw the wires down quickly and move on. Buyers who want more length for cross-room runs or who require a pre-crimped plug on both ends should look at a different cable.
Behaviour on a permanent link
The screw-fixed terminals maintain contact through vibration and thermal cycles once tightened. No solder joints means no cold-joint risk, so the connection stays stable for the life of the installation.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 9,917 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Questions about this item
What type of socket must my device have to accept the RJ45 male plug on this cable?
Your device needs an RJ45 mother socket interface, which is the standard female port found on most network equipment.
Can I use this 0.3 m extension with an existing Cat5 or Cat5e installation without re-terminating the older cable?
Yes, the solderless screw terminals let you clamp the solid or stranded wires from your legacy cable directly, so no crimping or soldering is required.
How can I verify the 8-core connection is live after tightening the screws?
Plug the RJ45 end into a switch or router and check for link LEDs on both ports; a cable tester will also confirm all eight conductors show continuity.
More in Ethernet & LAN Cables
Similar items
Cables To Go 31360 Cat6 network ethernet cable 75 ft Gray
- RJ45
- RJ45
Nlp Comprehensive CAT6-10GRY-USA network ethernet cable
Belkin A3X126-07-YLW-M Cat5e Crossover Network Ethernet Cable 7 ft Yellow
- 5E (Crossover)
- Consumer Electronics
Belkin A3L791-06 network ethernet cable Cat 5E 6 ft Gray
- 5E
- Consumer Electronics






