Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Routes three HDMI sources to one display at up to 8K 60 Hz with 48 Gbps bandwidth, HDMI 2.1 and HDCP 2.3, plus 36-bit deep colour and 3D support
The ESTONE OZ8Q3-1 connects three HDMI sources to one display, supporting 8K at 60 Hz and 48 Gbps bandwidth. It handles 4K at 120 Hz, 1080p at 240 Hz, and 3D content with deep colour up to 36-bit. A single button and LED indicators select the active source without drivers or external power. Ideal for users with multiple consoles, PCs or streamers feeding one screen.
The unit draws power from the connected HDMI sources, so it runs silently and adds no heat to the setup. Its compact 5.91 x 2.36 x 0.79 inch enclosure weighs 11.9 ounces and includes a 5 ft pigtail cable for the output. Because it is unpowered, very low-voltage sources may need a second device connected to maintain a stable signal.
The decisive specification is the 3-in-1 topology at full HDMI 2.1 bandwidth. Buyers needing to switch more than three sources, or who require automatic switching, EDID management, or a second simultaneous output, will find this switch does not meet those needs.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Product line | OZ8Q3-1 |
| Model name | OZ8Q3-1 |
| Part number | OZ8Q3-1 |
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | 48 Gbit/s |
| Display | |
| Maximum supported resolutions | 7680 × 4320 |
| Ports & slots | |
| Port count | 3-Port UHD |
| Input ports | 3 x HDMI |
| Output ports | 1 x HDMI |
| Size & build | |
| Product dimensions | 5.91 × 2.36 × 0.79 in |
| Product weight | 11.9 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1x HDMI 2.1 Switch 1x User Manual |
Connect each source to the three HDMI inputs, run the attached pigtail cable to the display, then press the button to select the active port; the step often missed is powering on at least two sources so the switch draws enough current to pass a stable signal.
The unit has no moving parts or firmware, so no scheduled maintenance is required; only the 5 ft pigtail cable or the switch itself would need replacement if physical damage or a port failure occurs.
The 48 Gbps bandwidth ceiling is the first hard limit; sustained 8K 60 Hz 12-bit HDR content uses the full pipe, so any cable degradation or added adapter length will cause drop-outs before thermal throttling becomes a factor.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?