BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Silk PLA filament with a shiny, pearlescent finish, ±0.05 mm dimensional accuracy and tangle-free 1.75 mm spool for smooth, clog-free printing
eSUN Silk PLA filament delivers a shiny, pearly surface straight from the nozzle so printed parts need no polishing. The 1.75 mm diameter spool weighs 1 kg and suits hobbyists and makers who want eye-catching models without post-processing. It works on any FDM printer that accepts standard PLA diameters.
The material prints between 190 and 230 °C with a recommended hot-end temperature of 210 °C and a heated bed at 45 to 60 °C. Cooling fan runs at 100 % for clean overhangs, while low warping and minimal shrinkage keep dimensions steady during long prints. Low odour and low fume output make it suitable for home or classroom use.
Each spool ships in a vacuum-sealed bag with desiccant and a product manual to preserve dryness and prevent tangles. The packaging keeps filament ready to feed without moisture-related popping or nozzle clogs. A printed guide lists the recommended temperatures, speeds and bed surfaces for quick setup.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | eSUN |
| Model name | PLA Filament |
| Product color | Sliver |
| Product type | 3D Printing Filament |
Heat the nozzle to 190-230°C, push filament until it extrudes cleanly; the step people skip is feeding the loose end through the spool holes after every print to stop it crossing over itself and tangling.
Keep it dry — after opening, return unused filament to the vacuum bag with the desiccant and store in a cool place; if the printer sits idle more than a couple of days, retract the filament to protect the nozzle.
The supplier rates printing speed at 40-100 mm/s; pushing beyond 100 mm/s is where layer adhesion and the silk surface quality drop off first.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?