ETopSell 4375 8" 4-pin Molex to 3.5" floppy power splitter cord
Adds a 3.5" floppy power connector by splitting an existing 4-pin Molex lead
- Adds a 3.5 floppy power connector from a Molex source
- Y splitter design provides one extra FDD plug without replacing the PSU
- 8 inch cable length fits tight case routing
- Model 4375 built for standard 4 pin Molex to floppy conversion
- New condition ensures reliable power delivery to legacy drives
4-pin Molex to 3.5" floppy power splitter
The ETopSell 4375 is an 8-inch Y-cable that converts a single standard 4-pin Molex connector into an additional 4-pin floppy drive power connector. It is designed for users who need to add a 3.5-inch floppy drive or compatible device without replacing the power supply unit.
Suits legacy builds needing extra FDD power
This splitter suits builders working with older systems that still use 3.5-inch floppy drives and have a spare Molex lead available. It is not for systems that lack a free 4-pin Molex connector or for installations where the fixed short length cannot reach the drive mounting position.
8-inch fixed cable length
The cable measures 8 inches from end to end, which determines whether it can bridge the gap between your power supply's Molex output and the floppy drive's power input. Measure your chassis routing before purchase to confirm the reach is sufficient for your specific layout.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 91% of the 428 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | OEM |
| Model name | 4375 |
Questions about this item
Will the 8-inch length reach from a Molex connector to a 3.5-inch floppy drive in a standard tower?
The cable is 8 inches long, so measure the distance between your PSU Molex output and the floppy bay before buying.
Which way round do the Molex and floppy connectors go, and what is the common mistake?
Plug the single Molex end into the PSU and the two floppy ends into drives; forcing a connector upside-down bends pins.
When should the splitter be replaced if the floppy drive loses power intermittently?
Replace the cord if the Molex or floppy pins feel loose, show discoloration, or the drive cuts out when the case vibrates.
More in Y-Splitter Power Cables
Similar items
Cable Matters 4 Pin PWM Fan Splitter 2 Pcs 1 to 3 11 Inch Black
- DVI to DVI
- Female to Female
4XEM 4XHDMIVGA10FTU 10ft HDMI to VGA adapter cable with USB power
2-Power 5520XLEH6289 3-Pack 5V 3-Pin ARGB Splitter Cables White
- Female-to-Female, 3…
- White
Shenzhen Aimilai Technology Co.Ltd. 12-Way 5V RGB LED Splitter Hub with PMMA Case and Magnetic Standoff
Cable Matters 2-Pack 3-Way 4 Pin PWM Fan Splitter Cable 10.6 Inches 27 cm
- < 1 in
- Dushochn, 1, 1.7018…





