Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Euogeudel
A compact trigger board that negotiates 5V to 28V from any USB-C PD3.1 charger, delivering up to 140W through screw terminals for DIY power projects
This Euogeudel board turns any compatible USB-C fast charger into an adjustable DC supply by requesting fixed voltages from 5V to 28V. It is aimed at engineers and hobbyists who need a lightweight, tool-free way to power routers, modems, battery projects or test equipment from an existing PD or QC source.
The module triggers PD2.0, PD3.0, PD3.1, QC, FCP and AFC protocols through a USB-C female input and delivers power via a KF301-2pin screw terminal. Output is capped at 100W on the 20V setting and 140W at 28V, but actual current and power depend entirely on the charger and cable used; the board cannot boost or buck voltage beyond what the source negotiates.
It replaces dedicated wall-warts or bench supplies when a suitable USB-C charger is already available, saving space and cost for single-voltage loads up to 5A. The jump is worthwhile only if your charger supports the exact voltage you need and can deliver the required wattage; chargers lacking the requested profile will default to a lower output or shut down.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Euogeudel |
| Model name | PD3.1-DIP Switch |
| Part number | ASDS-ZH356 |
| Product type | 1 PCS |
| Product color | 1 PCS |
| Size & build | |
| Product dimensions | 41.0 in × 20.0 in × 11.0 in |
| Product weight | 5 g |
Set the 3-position DIP switch to the row marked 12 V on the printed table; the board will then request 12 V from any PD3.0, PD3.1, QC, FCP or AFC charger that supports that level.
The board can pass up to 5 A at 28 V if the charger and a single E-marked cable both support PD3.1 EPR; otherwise the charger limits the actual power to its own capability.
It takes power through a USB-C female port and delivers it via a KF301-2pin screw terminal; the USB-C link caps at 5 A and 28 V, so 140 W is the hard ceiling.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?