Extreme BDS108H 8-Way Digital Splitter 1 GHz Horizontal
Eight-way coaxial splitter distributes 5–1002 MHz signals with 11.0 dB loss per port and 130 dB EMI shielding
- Product colorSilver
- Product weight0.35
- 1 GHz bandwidth supports premise and MDU networks
- 5–1002 MHz range with EMI shielding to -130 dB
- Consistent 11.0 dB insertion loss across all eight ports
- Zinc die-cast housing with soldered back for durability
- Capacitive-coupled F-ports prevent hum modulation
What the splitter does
The Extreme BDS108H is an eight-way digital splitter built for premise, multi-dwelling unit and business installations. It divides a single coaxial feed into eight outputs while maintaining 1 GHz bandwidth across the 5–1002 MHz range.
Signal loss and shielding
Each output presents 11.0 dB insertion loss across the band. The zinc die-cast housing with a fully soldered back provides EMI shielding rated at –130 dB, and capacitive-coupled F-ports prevent hum modulation.
Continuous operation
Machined F-ports are pressure sealed and the soldered back maintains shield integrity under sustained RF load. The horizontal flex-mount layout fits standard rack or wall plates for permanent deployment.
How it compares
Measured against everything we stock in HDMI, VGA & USB Splitters, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 65% of the 232 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Extreme Broadband Engineering |
| Model name | BDS108H |
| Part number | BDS108H |
| Product color | Silver |
Questions about this item
How do I install the Extreme BDS108H horizontal splitter and what is the common mistake?
Mount the unit horizontally using the integrated flex bracket, then tighten each F-connector to 11.0 dB return-loss spec; the step most installers miss is leaving the ground block unbonded, which breaks the -130 dB EMI shield.
What maintenance or replacement will the Extreme BDS108H need over time?
The zinc die-cast housing and soldered back are sealed for life; only the capacitive-coupled F-ports may need re-torquing if vibration loosens them, otherwise no internal components require service.
What limit appears first on the Extreme BDS108H during sustained high-frequency use?
The 1002 MHz bandwidth ceiling is the first hard limit; signals above that frequency roll off, and the fixed 11.0 dB insertion loss per port cannot be recovered by any adjustment.
More in HDMI, VGA & USB Splitters
Similar items
Gefen 60287 3.5mm Aux Splitter Silver 20 cm
- Auxiliary
- 20 cm × 0.65 cm × 0…
JSAUX JSUSKJ3AU23AU2FRDZ6F 3.5mm TRS to Dual 3.5mm Splitter Red 0.9ft
- 3.5 mm Male TRS to…
- 40 in × 0.5 in × 0.…
ATEN VS172 2-Port DVI Dual Link Splitter with Audio
- DVI
- Connectors, Video I…
Fidioto 2-Pack 3.5mm TRRS Headset Splitter Braided
- Auxiliary
- Auxiliary, 3, BLACK





