Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 mm square, 20 mm thick case fan moves 14.2 CFM at 3900 RPM with 28 dB noise from a 12 V, 0.08 A oil bearing motor
This 60×60×20 mm axial fan runs on 12 V DC and draws only 0.08 A, making it suitable for small-form-factor cases and space-constrained industrial enclosures. The oil-bearing motor keeps weight down to 49 g while delivering steady airflow for targeted component cooling. It is not intended for high-static-pressure radiators or builds that demand PWM speed control.
At 3900 RPM the fan moves 14.2 CFM with a static pressure of 2.8 mmH₂O, the single figure that determines whether it can overcome the resistance of your heatsink or filter mesh. Noise is rated at 28 dB, so it stays audible but unobtrusive in quiet environments.
The 0.96 W motor provides enough headroom for typical VRM, chipset or SSD spot-cooling in a 60 mm mount, but it will run out of pressure on dense radiator fins or restrictive dust filters. Builders needing higher CFM or PWM regulation should look for a larger frame size.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
At 14.2 CFM the fan shifts a modest volume of air, suitable for spot-cooling a small heatsink or venting a tight chassis rather than driving high-flow front-to-back cooling.
The fan runs on standard 12 V DC, so it connects directly to a typical 3-pin or 4-pin motherboard header or a 12 V fan controller without adapters.
Yes, the 60 x 60 x 20 mm dimensions match standard 60 mm square mounting holes with 20 mm depth clearance.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?