Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
120 mm blower-style case fan delivering 32.5 CFM at 2800 RPM with 54 dB noise and ball-bearing reliability
The Delta BFB1212HH-R00 is a 120 mm blower-style case fan rated for 32.5 CFM and 1.063 inches of water column static pressure. It runs on 12 VDC with a 1.1 A rated current and a 13.20 W power draw. The 32 mm thick frame houses a ball-bearing motor spinning at 2800 RPM. It suits builds that need directed airflow through tight channels or heatsink fins.
Axial fans move air across open space; this blower concentrates flow in a narrow exhaust path, making it the upgrade when components sit behind dense fin stacks or in rackmount chassis with restricted clearance. The jump is worth it when static pressure matters more than raw volume and the 54 dB(A) noise level fits the environment. It does not suit silent-focused builds or cases that rely on wide, low-pressure intake.
At 2800 RPM the fan delivers its rated airflow and pressure continuously within a 4 to 13.8 VDC operating range and -10 to 60 °C ambient limits. Ball-bearing construction targets a 50000-hour life at 40 °C. A speed-sensor lead allows motherboard monitoring under load. Noise and power remain constant because speed does not throttle; thermal throttling of attached components is the only variable.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The fan measures 120 mm by 120 mm square with a 32.00 mm thickness. Standard 120 mm case fan mounting holes apply; allow 32 mm depth clearance behind the mounting surface.
The three leads carry 12 V power, ground and a speed sensor (tachometer) output. Match the connector keying to your motherboard or fan header; the third wire reports 2800 RPM to the controller.
The ball bearing is rated for 50000 hours at 40 °C ambient. In typical case temperatures the fan should run several years continuously before bearing wear requires replacement.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?