Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 175 mm centrifugal case fan moves 330 CFM at 3100 RPM with PWM control and a tachometer signal
The Fans R1G175-AB41-64 is a 175mm diameter motorised impeller designed for forced electronic cooling in enclosures that demand high static pressure. It delivers 330.0 CFM at 3100 RPM while drawing 34W from a 48VDC supply. The ball-bearing motor operates between -25°C and 60°C and carries CCC, CSA, UL and VDE approvals.
This centrifugal design replaces conventional axial case fans when airflow must be pushed through restrictive filters, dense heatsinks or long duct runs. The jump is worth it when system impedance limits axial units and the 9.24 m³/min rated flow at 65.0 dB(A) meets the thermal target without exceeding the acoustic budget.
Four leads provide power, ground, PWM speed control and a tachometer signal so the motherboard or fan controller can modulate RPM in real time. The 36–57VDC input range tolerates typical industrial bus variation and the 0.800A current rating eases power-budget planning. The 69mm depth and 1.6lb weight suit standard 175mm mounting patterns without blocking adjacent slots.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The fan measures 175 mm in diameter and 69.00 mm in width, weighing 725.7 g, so verify your chassis has a 17.5 cm round cut-out and enough depth for the 69 mm profile.
Connect the 48 VDC supply (36–57 VDC range) to the power leads, then route the PWM input and tach output to the motherboard header; the unit draws 0.800 A at 34 W, so ensure the header can supply that current.
The ball bearing is rated for continuous operation between -25 °C and 60 °C at 3100 RPM; monitor for rising noise above the specified 65.0 dB(A) or RPM drop as indicators that the bearing is nearing end of life.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?