Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An AC 230 V axial case fan running at 2600 or 2850 rpm with die-cast aluminium housing and motor stall protection
The Fans W2E250-HJ28-01 is a new 250 mm AC axial fan from ebm-papst designed for forced electronic cooling in industrial and commercial equipment. It runs on 230 V AC at 50 Hz or 60 Hz with a die-cast aluminium housing and terminal power connection. Motor stall protection and overload resistance support continuous operation in demanding environments.
This unit fits engineers integrating cooling into 230 V AC systems where 2600 rpm at 50 Hz or 2850 rpm at 60 Hz meets the thermal target. It is not for PC builders who require 12 V DC PWM control, low-noise profiles below 250 mm dimensions, or motherboard header connectivity. Buyers needing variable speed via standard PC fan headers should look at DC alternatives.
At 50 Hz the fan draws 0.5 A and 115 W while producing 2600 rpm and 150 Pa maximum back pressure. At 60 Hz it draws 0.7 A and 160 W for 2850 rpm and 120 Pa. The 3.5 µF 400 V capacitor is included. Operating range spans -25 °C to 70 °C at 50 Hz and -25 °C to 55 °C at 60 Hz.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, it requires a 3.5 µF capacitor rated at 400 V DB, which matches the S0 (CE) standard listed for this model.
At 50 Hz the motor runs at 2600 rpm drawing 0.5 A and 115 W, so your current supply matches the lower speed figure exactly.
Measure the current draw; it should stay near 0.5 A at 50 Hz or 0.7 A at 60 Hz, and the built-in stall protection will cut power if the rotor locks.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?