DELL 452-BCZF-RF D6000 docking station
- 1 x USB Type C, 5 x…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds an OCuLink SFF-8612 port to a 2280 M-Key slot for NVMe SSDs or eGPUs
The Fervit 2280 PCI-E 4.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Vertical Host Adapter adds an OCuLink port to a 2280 M-Key slot. It lets you attach an NVME U.2 SSD or an eGPU graphics card through an optional cable. The board carries PCI Express 4.0 signals using the NVME protocol. It is built for builders who need external high-speed storage or graphics expansion.
Your system must provide a 67 pin M.2 Key M male slot wired for PCI Express 4.0. The adapter simply passes those lanes to the SFF-8612 female connector. If the slot is Key B, Key E or limited to an older generation, the link will not work. No active components are on the board, so the host controller defines every limit.
The adapter has no fan, heatsink or active circuitry, so it adds no audible noise. Power draw is limited to the trace losses of the PCI Express 4.0 link itself. Thermals depend entirely on the attached drive or eGPU enclosure and the airflow inside your chassis.
Measured against everything we stock in USB-C & Laptop Docking Stations, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Fervit |
The adapter passes PCI Express 4.0 signals through the NVMe protocol, so a connected NVMe SSD or eGPU can run at Gen 4 speeds if the host slot and the cable both support Gen 4.
The vertical SFF-8612 female port follows the OCuLink SFF-8611 specification, carrying four PCIe 4.0 lanes; the practical limit is the host slot speed and the cable quality, not the connector itself.
It plugs into a 2280 M-Key M.2 slot using its 67-pin male edge connector and stands vertically, so the board needs clearance above the slot for the OCuLink cable to exit cleanly.
More in USB-C & Laptop Docking Stations
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?