Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 24-pin USB 3.1 Type-C male OTG connector with a 5.1 k resistor for host function, supplied with a 3.0 mm strain relief and housing cover requiring soldering
This pack contains five USB 3.1 Type-C male connectors fitted with a 5.1k resistor to enable OTG host mode. Each unit includes a 3.0 mm strain relief and a black housing cover mounted on a small PCB. The connectors are reversible and plug either way into a USB-C female port. They do not support Power Delivery or data transfer.
You must solder your own wires to the PCB pads; no pre-terminated cable is supplied. The 24-pin layout demands careful alignment and a fine-tip iron to avoid bridging adjacent contacts. The included strain relief and housing cover help protect the joints once soldering is complete. Mistakes typically come from insufficient heat or misreading the pin orientation.
These connectors only function as an OTG host adapter; they will not negotiate PD voltage or carry USB data signals. Confirm that your target device expects a 5.1k pull-up on the CC line to enter host mode. Ensure you have the tools and skill to solder 24 fine-pitch pads and that the finished cable length suits your enclosure.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
Plug the finished cable into a USB-C female port; the connected device should recognise the host and allow peripheral control without Power Delivery or data negotiation.
Five USB 3.1 Type-C male connectors with 5.1k resistor, PC board, 3.0 mm strain relief and black housing covers are included; you must provide and solder your own cable wires.
This 24-pin USB 3.1 Type-C male connector with 5.1k resistor is the only variant offered and is designed specifically for OTG host function, not Power Delivery or data.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?