Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds four 10 Gbps USB 3.1 Gen 2 ports — two Type-A and two Type-C — to a 5.25″ bay with SATA power and a 20-pin Type-E motherboard link
This Fervit hub adds two USB 3.1 Gen 2 Type-A and two Type-C ports to the front of a desktop, turning an empty optical-drive bay into a high-speed data and charging station. It connects to a motherboard 20-pin Type-E header and draws supplementary power from a SATA connector. The unit suits builders who want fast peripheral access without opening the case.
The VL822 chipset with Multiple INs technology keeps all four ports at the full 10Gbps signalling rate during long transfers, avoiding the slowdown typical of single-lane hubs. Dedicated SATA power (5V/2A) feeds bus-powered drives so they do not throttle or disconnect under load. Windows 11 down to XP recognise the hub natively, so performance is consistent across OS versions.
The chassis slides into any standard 5.25-inch bay and secures without screws, leaving the front panel flush for daily plugging and unplugging. A single 20-pin Type-E cable carries both data lanes to the motherboard; systems lacking that header cannot use the hub. Ports provide data and power only, with no video or Thunderbolt capability.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The hub has no fan and draws power from the SATA connector, so it runs silently; any warmth stays within normal limits for a VL822 controller under continuous load.
You need a free 20-pin Type-E header for USB 3.2/3.1 and a spare SATA power plug from the PSU to supply 5V/2A.
Yes — each port negotiates independently, so a USB 3.0 device runs at its native 5Gbps while the other ports still deliver 10Gbps.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?