Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5.5×2.1 mm male-to-female power cable with an inline on/off switch for 5 V or 12 V low-power devices
This inline power switch cable connects devices with a 5.5x2.1mm DC barrel jack. It carries only DC power at 5V or 12V and does not transmit USB data. The built-in button lets you toggle power without unplugging the connector. It is intended for low-power peripherals such as LED lamps, small fans or similar 5.5x2.1mm equipment.
Plug the male end into your power source and the female end into the device, then press the button to switch power on or off. The cable supports only low-power loads and cannot be used with high-power equipment or PD chargers. Because it lacks data lines, it will not work for devices that require USB communication. Forcing it into an incompatible port may damage the connector.
Verify that both your power supply and the target device use a 5.5mm outer diameter and 2.1mm inner diameter barrel connector. Confirm the device operates at 5V or 12V and draws only a low current suitable for a two-core charging cable. Ensure you do not need USB data transfer or fast-charging protocols, as this cable provides neither.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
Press the on/off button and verify the connected device powers on or off immediately; the cable passes only DC power at 5V or 12V with no data lines.
The package includes the Fervit DC switch cable with 5.5x2.1mm male and female ends; you must supply a compatible DC power source and a device with a matching 5.5x2.1mm input.
The same cable handles both 5V and 12V low-power devices; choose it if your lamp or fan uses a 5.5x2.1mm jack and draws within the supported range.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?