Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two USB-A devices to a 2.54 mm header for DC 5 V power delivery up to 2 A shared, with a 75 mm latch-mount cable
This Fervit cable provides two Type-A female sockets on a 75 mm lead that terminates in a 2.54 mm pitch 2-pin header with latch mounting. It is designed for DIY and OEM builders who need to route USB power to a front panel or cabinet device without soldering. The assembly carries DC 5 V at up to 2 A shared across both ports and transfers power only, not data.
Verify that your motherboard or controller offers a 2.54 mm pitch 2-pin header with the correct pinout for 5 V and ground. Confirm the header can supply up to 2 A total, because both sockets share this limit. Ensure the 75 mm cable reach suits your internal routing and that the latch mounting holes match your chassis cut-out.
The short 75 mm length and latch-mount sockets keep the installation neat inside small enclosures, freeing space that a longer harness would occupy. Power-only operation means no USB data lines to manage, simplifying cable routing for charging stations or peripheral power. The dual sockets let you serve two devices from a single header.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The assembly arrives complete with two USB-A female sockets on a latch-mount bracket and a 2.54 mm pitch 2-pin header already crimped to the 75 mm leads; no extra connectors are required.
This model is offered only in the 75 mm length with a 2.54 mm pitch latch-mount header; if your board uses a different pin spacing or you need a longer reach, a different cable would be necessary.
The two ports share a single 5 V 2 A supply from the header, so the combined draw of both connected devices must stay within 2 A; one device can use the full 2 A or two can split it.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?