Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 30 cm adapter cable converts a 2280 M-Key slot to an OCuLink SFF-8612 female port with low-profile and standard brackets included
This 30cm cable adds a single SFF-8612 Oculink female port to a 2280 M-Key slot. It includes both an 8cm low-profile bracket and a 12cm standard bracket with fixing holes for secure installation. The adapter suits small hosts, desktops and laptops that need an Oculink connection for an NVME SSD or eGPU graphics card. Builders converting an internal M.2 socket to an external high-speed interface will find it a direct fit.
The passive cable assembly has no active components, so it adds no fan noise and draws no additional power beyond the host slot. Signal integrity is maintained for PCIe 4.0 at up to 64Gbps while remaining backward compatible with PCIe 3.0. Because the adapter only routes differential pairs, operating temperatures follow the host chassis airflow without creating a new thermal zone. No cooling consideration beyond normal case ventilation is required.
The male M.2 Key M connector occupies one 67-pin 2280 slot, while the female SFF-8612 port accepts a standard Oculink cable to reach a GPU, SSD or expansion card. Both bracket heights are supplied, letting the installer match low-profile or full-height chassis cutouts. The 30cm length keeps routing tidy inside compact enclosures and leaves the remaining M.2 or PCIe slots free for other devices. An optional Oculink cable is required to complete the link to the target peripheral.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
Insert the 67 pin M.2 Key M male connector into your 2280 M-Key slot at a slight angle then press down and secure with the motherboard standoff screw. Choose the 8cm low-profile bracket for slim cases or the 12cm standard bracket for full-height slots, aligning the fixing holes before tightening.
The SFF-8612 female port is rated for fewer mating cycles than the M.2 edge connector so it will show contact wear first if you frequently attach and detach OCuLink cables.
The 30cm length keeps signal loss low but the cable has no active cooling so prolonged 64Gbps transfers can heat the conductors enough to trigger throttling before the PCIe 4.0 spec limit is reached.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?