Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an M.2 NVMe slot into a PCIe x1, x4, x8 or x16 socket with a 30 cm flexible cable and SATA power cord
This right-angled adapter converts an M-key NVMe slot into a PCIe X1, X4, X8 or X16 socket. It suits builders who need to add a PCIe card when no full-size slot is available or when board layout blocks direct insertion. The package includes two PCBA boards, a 30cm flexible cable and a SATA power cord for 12V and 5V supply. The unit is new and ready for installation.
Power off the motherboard before fitting the adapter because the SATA power line is live only when the cable is connected and hot-plugging is not supported. Match the M-key notch orientation carefully to avoid damaging the slot or the card. The ultra-thin, foldable PCB and flexible PVC cable allow tight routing, but excessive force on the gold-plated fingers can still cause contact problems. Data rate will match the host M.2 interface speed and is limited to PCIe 3.0, 2.0 or 1.0 despite the PCIe 4.0 labelling.
This adapter suits users adding a single PCIe X4 device such as a capture card, network card or storage controller to an NVMe slot. It does not suit builds that require PCIe 4.0 bandwidth because the link cannot operate at that generation. Builders needing multiple PCIe devices or full x16 electrical bandwidth should look at a motherboard with native slots instead.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The system should detect the connected PCIe device in BIOS or Device Manager without errors, and the gold-plated fingers on both PCBA boards should make solid contact.
The box contains two PCBA boards, one 30cm flexible cable, and a 12V/5V SATA power cord; you must supply the PCIe card and a motherboard with an M-Key NVMe slot.
The adapter provides an X4 electrical connection that is backward compatible with X1, X2, X8 and X16 cards, though speed is limited by the host M.2 interface.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?