Tripp Lite U022-015 USB 2.0 A to B cable 15 ft
- USB A to USB B
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Right-angled M-key adapter converts an NVMe slot to a PCIe x1, x4, x8 or x16 connection for 2260 and 2280 drives, includes dual PCBA boards and a SATA power cable
The Fervit adapter converts an M-key NVMe slot into a PCIe X1, X4, X8 or X16 connector using a 90-degree plug. Two ultra-thin PCBA boards and a foldable flat cable allow installation where space around the motherboard socket is limited. A 12V/5V SATA power lead supplies auxiliary power when the cable is connected. The unit is new and does not support hot-plugging.
The right-angle M-key plug fits motherboards where a straight adapter would foul nearby components or heatsinks. It suits users adding a PCIe X4, X8 or X16 device such as a capture card or extra controller through an NVMe slot. Builders who need hot-plug capability or PCIe 4.0 bandwidth should look elsewhere, as the adapter tops out at PCIe 3.0 speeds and requires a powered-down system for installation.
The link runs at PCIe 3.0 2.0 or 1.0 rates depending on the host M.2 interface, so an X4 device operates at up to PCIe 3.0 X4 throughput. X8 and X16 cards work but are limited to the same X4 electrical bandwidth. The adapter accepts M.2 2260 and 2280 form factors. It cannot deliver PCIe 4.0 performance regardless of the host platform.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
Yes, the adapter plugs into an M.2 M-key slot that supports NVMe drives, and the right-angled 90-degree connector fits even when space around the port is tight.
The adapter accepts PCIe X1, X4, X8 and X16 cards, but the link runs at the speed of the host M.2 interface and is limited to PCIe 3.0, 2.0 or 1.0 — it cannot operate at PCIe 4.0 speeds.
Power off the motherboard first, connect the included 12V/5V SATA power cable, then boot; the attached PCIe device should appear in the BIOS or operating-system device manager, confirming the link is active.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?