Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 90° Micro USB 2.0 OTG adapter with a supplementary power port for USB Type-A devices, supporting 480Mbps transfer
This Fervit Micro USB 2.0 OTG adapter adds a standard USB Type-A female port to a phone or tablet with a micro USB host port. The 90 degree angled plug fits tight spaces around the socket. An extra micro USB power port supplies up to 5V 2A to the connected peripheral such as a flash drive or USB hard disk. It does not charge the host phone or tablet.
The right-angled design solves clearance problems where a straight adapter would hit the device edge or a case lip. The jump is worth it when the micro USB port is recessed or closely spaced and a straight connector cannot be fully seated. Aluminium alloy housing keeps the adapter rigid during frequent insertion and removal.
Verify the phone or tablet specifies OTG host functionality before ordering. The micro USB power input is required for bus-powered peripherals such as mechanical hard disks; low-power flash drives may work without it. The adapter carries data at up to 480Mbps and is plug-and-play with no driver installation needed.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The 90° left-angled Micro USB 2.0 connector is designed to fit alongside a female port even when surrounding space is limited, so it clears most tight bezels and cases.
It is fully plug-and-play; insert the Micro USB 2.0 plug into the host device first, then connect the USB Type-A peripheral, and finally attach external power to the extra Micro USB port if the peripheral needs it.
Use the extra Micro USB power port only when the connected USB Type-A device — such as a portable hard disk or high-draw flash drive — requires more current than the host can supply; it cannot charge the host phone or tablet.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?