Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five solder-type connectors convert Mini-USB 5-pin devices to USB-C for data up to 480 Mbps and 5 V 2 A power
This pack contains five Type-C female sockets designed to replace Mini-USB 5-pin connectors on cameras, MP3 players, speakers and similar peripherals. Each unit requires manual soldering and is intended for users with soldering proficiency. The Mini-USB mounting hole is larger than the Type-C footprint, so the opening must be reworked during installation. The connectors comply with USB 2.0 Base Specification.
The product ships as bare connectors without cables, enclosures or tools, so the builder must supply a soldering iron, flux and suitable wire. Because the original Mini-USB aperture is wider, the mounting surface needs filing or drilling to fit the smaller Type-C body securely. No firmware, drivers or configuration software are included or needed for the hardware swap.
The interface supports USB 2.0 Hi-Speed at 480 Mbps and falls back to USB 1.1 Low-Speed at 1.5 Mbps for legacy devices. Power delivery is rated at DC 5 V 2 A when paired with a compliant USB 2.0 Type-C source and device. The connectors are not suitable for USB 3.x or higher bandwidth applications, nor for power requirements above the stated 2 A ceiling.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The connector is rated for USB 2.0 Hi-Speed at 480 Mbps and DC 5V 2A; mechanical wear on the solder joints depends on your board layout and strain relief, not on the connector specification itself.
The part is specified for DC 5V 2A throughput; the limiting factor will be the PCB trace width and copper weight you provide, since the connector itself carries the rated current without an internal fuse or thermal shutdown.
No active components are present, so there is no fan or coil whine; temperature rise is determined by the resistance of your solder joints and PCB traces at 2 A, not by the connector housing.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?