Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a USB 2.0 Type-A device to a motherboard 9/10-pin header with a 20 cm braided cable for 480 Mbps data and power
This 20 cm cable adds a single USB 2.0 Type-A port to a desktop by plugging into a motherboard 9-pin or 10-pin header. It suits builders who need an extra front-panel or internal connection for peripherals such as card readers, dongles or charging devices. The woven braid sleeve protects the conductors during routing and long-term use.
Verify that your motherboard has a spare USB 2.0 header with the standard 9-pin or 10-pin layout before ordering. Only the Pin6 to Pin10 side of the header carries signals; Pin1 to Pin5 are not connected on this cable. The link operates at 480 Mbps and supplies both power and data, so the header must be a powered USB 2.0 type.
The short 20 cm length keeps cable clutter low inside compact cases and reduces signal degradation. The male Type-A connector accepts any standard USB 2.0 peripheral, while the header plug fits directly onto the board without an adapter. The braided jacket resists snagging on other components and frees up space for airflow around the motherboard.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The cable has a male Type-A plug on one end and a 9/10-pin motherboard header on the other. No extra parts are required to connect a front-panel USB port.
The plug fits both 9-pin and 10-pin USB 2.0 headers; only the Pin6-Pin10 side carries signals, so align that side with your board's keyed header.
It is the USB 2.0 theoretical maximum; actual speeds are lower due to protocol overhead and the connected device's performance.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?