Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.0 19-pin header into two USB 2.0 9-pin ports with 480 Mbps speed and 500 mA per port
This Fervit adapter converts a single 19-pin USB 3.0 motherboard header into two 9-pin USB 2.0 connectors. It is designed for PC builders who need extra front-panel or internal USB ports but only have one high-speed header available. A built-in USB 2.0 hub chipset manages the split without requiring additional drivers or software configuration.
When a chassis provides two USB 2.0 front-panel cables but the motherboard offers only one 19-pin header, this adapter eliminates the need to leave one port unused. The upgrade is worthwhile whenever the case layout demands both connectors simultaneously and no spare USB 2.0 headers exist on the board. It does not add USB 3.0 bandwidth; the two new ports operate at USB 2.0 speeds.
Each 9-pin connector delivers up to 480 Mbps data throughput and 500 mA at 5 V, suitable for keyboards, mice, card readers or USB audio devices. The hub chipset shares the single upstream 19-pin link, so combined throughput cannot exceed the USB 2.0 limit. Devices that require USB 3.0 transfer rates or higher current draw will not perform at their rated capability on these ports.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The adapter plugs directly into a standard 19-pin USB 3.0 motherboard header and presents two 9-pin USB 2.0 headers, so it fits any board with that 19-pin keying.
Align the keyed 19-pin plug with the motherboard header, press straight down until fully seated, then attach your front-panel or accessory cables to the two 9-pin headers.
The USB 2.0 HUB chipset is soldered on the PCB, so a chipset failure means replacing the entire adapter; each port still delivers 5 V at 500 mA while it works.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?