Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds a screw-mount USB 3.0 Type-A port to a motherboard 20-pin header with a 90-degree down-angled connector and 25 cm cable
This 25 cm cable converts a motherboard 20-pin header into a single USB 3.0 Type-A female port. The down-angled header connector eases routing behind a front panel or drive bay. Two screw holes on the port flange allow a secure panel mount. It suits builders adding a front USB 3.0 port to a case that lacks one.
Your motherboard must expose a standard 20-pin USB 3.0 header with the correct keying. Verify the down-angled plug will clear nearby components once seated. The mounting holes require a panel thick enough for screws and a cut-out matching the Type-A flange dimensions. No internal drive bay or bracket is included.
The 90-degree header bend keeps the cable close to the board, reducing clutter behind shallow panels. A secure screw mount prevents the port from shifting when devices are plugged or unplugged. Moving one USB 3.0 connection to the front leaves rear ports free for stationary peripherals. The 25 cm length reaches most front-panel locations without excess slack.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The cable has a down-angled 20-pin motherboard header on one end and a USB 3.0 Type-A female port with two screw holes on the other; the 25 cm cable is the only part supplied, and mounting screws are not included.
Measure from your motherboard's 20-pin USB 3.0 header to the front-panel cut-out; if the straight-line distance is 25 cm or less, this cable will reach, otherwise you need a longer variant.
The 20-pin header carries the full USB 3.0 signalling, so the front-panel port can run at 5 Gb/s provided the motherboard header and any connected device also support USB 3.0.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?