Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 30x50 mm 68-pin mSATA SSD via USB 3.0 Type-C or Type-A for up to 6 Gbps SATA speeds with UASP and TRIM support
This docking cable connects a 68-pin mSATA solid-state drive to a host computer using either a USB Type-C or Type-A interface. It is designed for users who need to access data from standard 30x50mm mSATA drives without installing them internally. The device is bus-powered and requires no external power supply or driver installation across Windows 7 through 11, Linux, and Mac systems. It does not support M.2 SSDs or Mini-PCIe devices.
The integrated controller chipset complies with UASP and TRIM protocols to maintain consistent throughput during extended read or write sessions. Backward compatibility with USB 2.0 limits the connection to 480Mbps on older ports. When used with a USB-C Gen1 5Gbps host, the enclosure can reach the SATA III ceiling of 6Gbps, delivering up to 600MB/s. SATA Gen1 and Gen2 drives operate at 150MB/s and 300MB/s respectively.
The slim aluminium alloy enclosure acts as a passive heatsink, helping to keep the mSATA drive cool during prolonged operation without adding bulk. Its portable form factor makes it convenient for technicians moving between workstations. Dual Type-C and Type-A connectors eliminate the need for separate adapters when switching between modern and legacy USB ports. The plug-and-play design means the drive appears immediately upon connection.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The aluminum-alloy shell provides excellent heat dissipation for continuous operation.
You need a standard 30x50 mm 68-pin mSATA SSD in SATA mode; M.2 and Mini-PCIe drives are not supported.
Yes, it is backward compatible with SATA Gen1 at 1.5 Gbps and SATA Gen2 at 3.0 Gbps.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?