Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an NVME slot into a USB 3.1 20-pin front-panel header for up to 5 Gbit/s Type-C or Type-A ports
This Fervit adapter converts an available NVMe slot on a motherboard into a USB 3.1 20-pin front-panel header. It lets a chassis with a USB Type-C or Type-A port run at full USB 3.1 speed even when the board lacks a native header. The compact unit plugs directly into the M.2 slot and requires no extra cables or brackets. Builders adding front-panel USB to older or budget platforms will find it a direct fit.
The decisive specification is the conversion of a motherboard NVMe interface into a USB 3.1 front-panel header using a VL805 controller. It accepts a USB 3.0 20-pin socket on one side and presents a USB 3.1 20-pin header on the other, delivering up to 5 Gbit/s bandwidth. If your board has no spare NVMe slot, this adapter cannot be used.
The adapter draws power from the NVMe slot and the front-panel header, adding negligible load to the system. With no active components beyond the controller, it produces no audible noise and requires no airflow consideration. Normal case ventilation is sufficient for stable operation.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The 5 Gbit/s figure is the USB 3.1 signalling limit; actual throughput depends on the NVME drive, motherboard lane allocation and cable quality, so sustained copies will usually be lower.
It plugs into a USB 3.0 20-pin motherboard header, which is electrically limited to 5 Gbit/s, matching the USB 3.1 Gen 1 front-panel port.
The converter uses an M-key NVME slot on the motherboard and occupies a single USB 3.0 20-pin header for the front-panel connection.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?