Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 20 cm extension cable that links a USB 3.1 front-panel header to a USB 3.0 20-pin motherboard header for ASUS boards, supporting 3.1 and 3.0 devices but not 2.0 at 480 Mbps
This 20 cm cable connects a USB 3.1 front-panel header to a standard USB 3.0 20-pin motherboard header. It is designed for builders fitting a modern front-panel USB 3.1 port onto a board that only provides the older 20-pin connector. The link uses the USB 3.0 pin set with additional signals for backwards compatibility. It is a new Fervit accessory for internal case wiring.
The extension bridges the physical gap when a chassis USB 3.1 header cannot reach the motherboard's USB 3.0 20-pin header. It is worth fitting when the front-panel cable falls short or when the case supplies a USB 3.1 header that the board lacks. The cable only operates with USB 3.1 or USB 3.0 devices; it cannot fall back to USB 2.0 at 480 Mbps. No official USB 3.1 header specification existed at the time of writing.
This cable suits system integrators and DIY builders who need to route a USB 3.1 front-panel connector to a USB 3.0 20-pin header on an ASUS board. It is not for users who only have USB 2.0 front-panel ports, because the adapter does not support the slower interface. Buyers needing a longer reach or a different motherboard header layout should look at other internal cable options.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The 20-pin end connects to a standard USB 3.0 front-panel header on the motherboard.
Plug the USB 3.1 front-panel header side into the case port and the 20-pin side into the motherboard; reversing them gives no signal.
It only carries USB 3.1 and 3.0 signals, so a future header change would require a different cable.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?