Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type-E header to a 2.54 mm 4-pin USB 2.0 header with latch, 30 cm long, supporting 480 Mbps and 500 mA per port
This 30 cm cable converts a motherboard 20-pin USB 3.1 Type-E header into a standard 4-pin USB 2.0 connector with 2.54 mm pitch and latch. It targets builders who need to attach front-panel USB 2.0 ports or adapters when only the newer internal header is available. The direct plug-in design requires no extra brackets or wiring. Each port delivers 480 Mbps data and 500 mA at 5 V.
The cable puts a dormant Type-E header to work instead of leaving it empty or buying a separate controller card. The jump is worth it when the case provides only legacy 4-pin USB 2.0 leads and the board lacks a native 9-pin header. No driver installation is needed because the link remains electrically USB 2.0. It does not create additional bandwidth beyond the 480 Mbps limit.
Under continuous transfer the link runs at the USB 2.0 ceiling of 480 Mbps with a 500 mA current budget per port. The short 30 cm run and latched 4-pin housing keep contact resistance stable, so throughput does not degrade from connector wiggle. Thermal load stays negligible because the cable carries only signal and standard bus power. It is not suited for devices that demand USB 3.1 speeds or higher current.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The 4-pin connector uses a 2.54 mm pitch header with a latch to secure it to the motherboard.
Insert the Type-E male plug directly into the 20-pin motherboard header; no extra adapters or tools are needed.
The cable supports USB 2.0 speeds up to 480 Mbps and delivers 5 V at 500 mA per port.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?