Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
DIY solder-type USB-C male and female connectors with 18-pin PCB supporting 10 Gbps data and 65 W power delivery
This kit supplies one USB-C male plug and one female socket, each mounted on an 18-pin PCB for hand soldering. It carries USB 3.1 data up to 10 Gbps and delivers up to 65 W of power at 20 V 3.25 A. The parts are new and intended for builders who want to create or repair their own USB-C cables or device ports.
The connectors suit hobbyists and technicians comfortable with fine-pitch soldering on a small PCB. They are not suited to anyone who needs a ready-to-use cable, lacks soldering equipment, or wants a connector that snaps on without tools.
The 18-pin layout is the single spec that decides fit: it must match the pin assignment of the cable or board you are joining. If your project requires a different pin count or a pre-crimped lead, this kit will not work.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The 10 Gbps rating is the maximum data throughput the connector supports when built into a USB 3.1 Gen 2 link. Actual speed depends on the host controller, cable quality and the device you connect.
The 18-pin layout follows the USB 3.1 specification, capping data at 10 Gbps and power delivery at 65 W (20 V at 3.25 A) when used with a compatible 65 W source and device.
Each connector arrives with an attached 18-pin PCB; you must solder the cable wires to those pads yourself, so a fine-tip soldering iron, flux and steady hands are required.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?