Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A five-pack of screw-mount USB-C female sockets delivering up to 20 V and 65 W PD power plus USB 2.0 data at 480 Mbps
This five-piece set provides a screw-mount USB-C female socket with a six-pin PCBA header for custom panel integration. It suits builders adding a front-panel or enclosure port for charging and data. The connector accepts USB 2.0 PD sources up to 20 V and delivers up to 65 W to attached devices. Reversible plug orientation simplifies cable insertion in tight spaces.
The assembly maintains a continuous 65 W power path when paired with a compliant PD supply and device. USB 2.0 signalling runs at 480 Mbps without throttle during extended transfers. Voltage negotiation follows the PD contract, so output remains stable across the 5 V to 20 V range. No active cooling or thermal management is required on the connector itself.
Passive operation means zero fan noise and no additional power draw beyond the negotiated PD load. The screw-nut mount secures the socket firmly to a chassis, preventing strain on the PCB header. Contact resistance stays low under normal mating cycles, keeping temperature rise minimal. The design is intended for indoor cabinet or enclosure use rather than harsh environments.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The connector itself adds negligible loss; it simply passes up to 20 V at the negotiated PD level, so heat and power draw depend on the attached charger and device, not the socket.
You need a USB-C PD power source capable of 5 V or 20 V output, a panel cut-out for the screw-nut mount, and a 6-pin header or flying leads to wire the PCB pins.
Yes, the socket presents a standard USB 2.0 interface, so legacy USB-A devices connected via a passive USB-C to USB-A adapter will enumerate at 480 Mbps.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?