Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects M.2 NVMe, SATA and IDE drives to USB-C or USB-A, one drive at a time
This Fervit cable connects one M.2 NVMe, M.2 SATA, 2.5-inch SATA or 3.5-inch SATA drive to a USB-C or USB-A port. It accepts M.2 2242, 2260 and 2280 modules with M-key or B+M-key pinouts. Only one installed drive is active at a time; if both M.2 and SATA are fitted the SATA drive takes priority. Drives and 12 V power for 3.5-inch units are not included.
The adapter does not support M.2 PCIe AHCI SSDs, mSATA modules, WiFi cards, capture cards or non-M.2 form factors. NVMe drives require a host port capable of 10 Gbps USB 3.2 Gen 2 or faster for full speed; SATA drives operate at 5 Gbps. A separate 12 V DC supply is mandatory for any 3.5-inch SATA drive. Hot-plugging is not supported, so power down before swapping drives.
Because only one drive operates at a time, there is no concurrent I/O contention between slots. NVMe throughput holds at the host controller’s 10 Gbps ceiling during long reads or writes, while SATA devices saturate at 5 Gbps. Thermal throttling depends on the bare drive’s own dissipation, as the open PCBA provides no active cooling. Performance remains steady for the duration of a single-drive workload.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
The adapter includes attached USB‑C and USB‑A cables. You must supply any M.2 NVMe or SATA SSD (2242, 2260 or 2280), 2.5 inch SATA drive, or 3.5 inch SATA drive plus a separate 12 V DC power adapter for 3.5 inch models.
It works with M‑Key and B+M‑Key NVMe PCIe SSDs in 2242, 2260 and 2280 lengths. It does not support M.2 PCIe AHCI SSDs, mSATA, Wi‑Fi cards, capture cards or non‑M.2 drives.
An M.2 NVMe SSD runs at up to 10 Gbps over USB‑C Gen 2, while an M.2 SATA SSD is limited to 5 Gbps. 2.5 inch and 3.5 inch SATA drives also operate at the 5 Gbps rate.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?