We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit USB-C to TTL UART CH340G 3.3V 5V adapter

SKU CH-M682-30V4A

USB-C to TTL UART adapter with CH340G chip, selectable 3.3V or 5V levels, three status LEDs, and Windows 98 through Win8 32/64-bit support

  • USB-C connector simplifies modern laptop connections
  • CH340G chip ensures stable STC microcontroller programming
  • Jumper selects 3.3 V or 5 V logic levels
  • Three status LEDs show power, TX and RX activity
  • Broad Windows support from 98 through Win8 32/64-bit

USB-C to TTL UART adapter with CH340G

This Fervit adapter converts a USB-C port to a TTL serial interface using the CH340G chip. It is intended for engineers and hobbyists who program STC microcontrollers, upgrade firmware on routers or hard drives, or need a stable serial connection for embedded development. The module draws power directly from the USB-C host.

Suits STC workflows; not for RS-232 voltage levels

The board is designed around the STC officially recommended CH340G chipset, providing driver stability across Windows 98 through Windows 8 on both 32-bit and 64-bit systems. Three onboard LEDs show power, TX and RX activity without extra instruments. Buyers who need true RS-232 voltage swings or support for operating systems beyond Windows 8 should look at other solutions.

Jumper-selectable 3.3 V or 5 V TTL logic

A hardware jumper sets the I/O level to either 3.3 V or 5 V, matching the target device’s logic voltage. This single setting determines whether the adapter can communicate safely with a given microcontroller or module. Verify the required logic level before purchasing.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 60% of the 15,187 comparable items (median $14.99).

New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameFervit

Questions about this item

Does the adapter come with jumper wires or headers, or do I need to supply them?

The module is supplied as a bare board with a USB-C plug and a jumper for 3.3 V or 5 V selection; pin headers or dupont wires for the TTL side are not included.

Should I pick the 3.3 V or 5 V setting for an STC microcontroller?

Use the onboard jumper to match the target MCU voltage — 3.3 V for 3.3 V logic devices, 5 V for 5 V logic — the CH340G supports both levels.

Will the CH340G chip work on a 64-bit Windows 7 machine without extra drivers?

The CH340G requires the vendor driver (download U2-079) on every supported Windows version, including 64-bit Windows 7; it is not natively built into the OS.

More in USB Cords & Extension Cables

Similar items