Finisar Corporation FTLX1471D3BCLProduct 10 Gbps single-mode SFP transceiver
A 10 Gbps single-mode SFP+ transceiver for 10 Gigabit Ethernet links up to 10 km over single-mode fiber with LC duplex connector
- Port count1 x LC Duplex 10GBase-X
- Product typeTransceiver
- Transfer speed10 Gbit/s
- 10 Gbps throughput for high-speed data links
- Single-mode fibre reaches 10 km distances
- LC duplex connector fits standard patch panels
- Hot-pluggable SFP+ form factor enables live swaps
- MSA compliant and RoHS-6 certified for broad interoperability
10 Gbps single-mode SFP transceiver
The Finisar FTLX1471D3BCLProduct is a hot-pluggable XFP transceiver built for 10-Gigabit Ethernet links over single-mode fibre. It connects through one LC duplex port and targets data-centre operators who need reliable 10 km reach without replacing existing switch line cards. The module complies with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW standards. It is RoHS-6 certified and MSA compliant for broad vendor interoperability.
Sustained 10 Gbps throughput over 10 km
The transceiver maintains line-rate 10 Gbps across the full 10 km single-mode link without the short-burst limitations seen in some lower-reach optics. MSA-compliant electrical and optical interfaces keep error rates stable during continuous data-centre traffic patterns. SFF-8431 and SFF-8432 adherence ensures consistent signal integrity over extended operating periods. IEEE 802.3ae 10GBASE-LR/LW compliance guarantees the link budget required for long-haul sustained loads.
Low thermal load in normal rack conditions
The hot-pluggable XFP form factor draws modest power typical for 10 km single-mode optics, keeping slot temperatures within standard switch chassis limits. RoHS-6 construction eliminates restricted substances without adding thermal insulation that could trap heat. MSA-compliant mechanical dimensions allow normal airflow through adjacent populated cages. No active cooling is required on the module itself under typical data-centre ambient conditions.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 98% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Finisar |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 10 Gbit/s |
| Ports & slots | |
| Port count | 1 x LC Duplex 10GBase-X |
Questions about this item
How much power does the FTLX1471D3BCL draw when running a 10 Gbps link all day?
The transceiver is compliant with SFF-8431 and SFF-8432, which define the power envelope for SFP+ modules operating at 10 Gbps.
What patch cable and switch port are needed to use the LC duplex connector on this module?
You need a single-mode LC duplex patch cable and a switch or router port that accepts an SFP+ module running 10GBase-LR.
Will this hot-pluggable XFP work in an older chassis that only supports the original XFP MSA?
Yes, the module is Multi Source Agreement compliant, so it fits any MSA-compliant XFP cage and can be inserted or removed without powering down the system.
More in SFP & SFP+ Transceiver Modules
Similar items
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Other Electricities SFP Transceiver J4859C 1000BASE-LX 1310nm 10km
- Sfp
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Other Electricities SFP transceiver AGM732F 1.25Gbps 1310nm 10km Duplex LC SMF
- Sfp





