Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 19-pin USB 3.0 header to a 9-pin USB 2.0 motherboard connector at up to 4.8 Gbps, 15 cm length, two-pack
This 19-pin to 9-pin adapter cable lets you connect a USB 3.0 front-panel header to a USB 2.0 motherboard header. It is designed for PC builders who need to link a modern front-panel connector to an older or header-limited board. The 15 cm length suits tight internal routing. The pack contains two cables for dual-port panels.
When plugged into a USB 2.0 header the link runs at 480 Mbps, not the 4.8 Gbps the USB 3.0 side can support. The adapter is fully shielded with braid-and-foil construction and uses moulded strain relief for durability. It complies with the rated cable specification and uses 8b/10b encoding with LFSR scrambling. Throughput is therefore capped by the slower header.
The cable presents a 19-pin USB 3.0 male connector on one end and a 9-pin USB 2.0 female connector on the other. Verify that your motherboard provides a 9-pin USB 2.0 header and that your front panel or device terminates in a 19-pin USB 3.0 plug. Builders needing a 19-pin header on the board side or a different gender arrangement cannot use this adapter.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Mini USB to USB A |
The 15 cm length is designed to reach from a motherboard USB 2.0 9 pin header to a front panel USB 3.0 19 pin connector inside the case.
The adapter is built to USB 3.0 specification supporting up to 4.8 Gbps, but the USB 2.0 9 pin header limits actual throughput to 480 Mbps.
Yes, it converts a USB 3.0 19 pin header to a USB 2.0 9 pin header, fully compliant with the rated cable specification and shielding.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?