Formulamod Fm-NCK3 12VHPWR Extension Cable 300mm
A 300 mm 12VHPWR extension cable with 18 AWG braided sleeving for cleaner GPU power routing
- Refresh frequency300 mm
- Rated speedBraided
- Cable length300 mm
- Team affiliation2 Piece
- First connector1x PCIe 6+2pin female
- Second connector1x 12VHPWR PCIe Gen5 female
- Clean cable routing with 300 mm pre-bent extension
- 18 AWG copper cores ensure stable power delivery
- Braided nylon sleeve adds durability and sleek look
- 12VHPWR Gen 5 connector supports modern GPUs
- Adjustable combs keep cables aligned in any build
Extension Cable for 12VHPWR GPU Power
The Formulamod Fm-NCK3 is a 300-millimetre internal power extension designed for graphics cards that use the 12VHPWR connector. It adds length between the power supply’s existing PCIe 6+2-pin output and the GPU’s native 12VHPWR input, helping builders route cables cleanly in mid-tower or full-tower chassis.
Braided 18AWG Construction With Adjustable Combs
The cable uses 18AWG copper conductors wrapped in a braided nylon sleeve for stable power delivery and a uniform look. A pre-bent structure holds a consistent curve after installation, while the heat-shrink-free design avoids bulky junctions. Included cable combs are fully adjustable and removable, letting you align each wire for a tidy finish.
Extends Existing PSU Cables — Not a Replacement
This product only extends the original modular cables supplied with a standard ATX power supply; it cannot connect directly to the PSU itself. The jump is worth it when the stock GPU cables fall short of a clean routing path or when you want a sleeved appearance without replacing the entire PSU loom. Builders who need a direct PSU-side modular cable should look elsewhere.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $39.99
- Pricier than about 78% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Formulamod |
| Model name | Fm-NCK3 |
| Product type | PCI-E |
| Product color | Black |
| Performance | |
| Rated speed | Braided |
| Display | |
| Refresh frequency | 300 mm |
| Ports & slots | |
| First connector | 1x PCIe 6+2pin female |
| Second connector | 1x 12VHPWR PCIe Gen5 female |
| Connector details | PCI-E |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 300 mm millimeters 300 |
| Cable length | 300 mm |
| Cable shielding | Braided |
| Build details | Nylon, braided polymer, or similar |
| More details | |
| Team affiliation | 2 Piece |
Questions about this item
Does the 12VHPWR connector support the full 12-pin PCI-E Gen5 interface?
Yes, the female 12VHPWR end accepts the 12-pin PCI-E Gen5 plug from a modern graphics card, extending the existing PSU cable by 300 mm.
Will the 300 mm braided cable with pre-bent structure fit behind a mid-tower motherboard tray?
The 11.8-inch length and pre-shaped curve are designed for standard mid-tower and full-tower routing; the combs are adjustable to keep the bundle tight against the tray.
How do I install the extension without reversing the male and female ends?
Plug the 6+2-pin female connector onto the PSU's native PCI-E cable first, then connect the 12VHPWR female end to the graphics card; the keyed sockets prevent incorrect insertion.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





