Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 12 V input to a fixed 9 V output at up to 18 W with 90 % efficiency, plus over-temperature and over-current protection in a waterproof, shock-resistant housing
This GCON buck converter steps a 12 V DC source down to a fixed 9 V output at up to 2 A, delivering 18 W for routers, LED strips or small embedded boards. Synchronous rectification keeps efficiency up to 90 %, so the module runs cool in continuous operation. A potted glue coating makes the unit waterproof, dust-proof and resistant to shock and moisture. Over-temperature and over-current protection guard the load and the converter itself.
Swap a wasteful linear regulator or an oversized AC adapter for this compact module when the input stays at least 3 V above the 9 V output. The efficiency jump is worth it in battery-powered or enclosed projects where heat dissipation is limited and every milliampere of run-time counts. It is not for designs that need adjustable voltage, isolated outputs or input voltages below 12 V.
The converter comfortably powers 9 V loads up to 2 A, such as development boards, sensor arrays or portable audio gear, with minimal voltage droop. Beyond 2 A the over-current protection engages, so it cannot drive higher-power motors or charge large battery packs. The 90 % conversion rate means roughly 2 W of heat at full load, which the sealed case handles without external heatsinking.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The module needs at least 12V input because the output is fixed at 9V and the minimum differential pressure is 3V.
Connect the higher-voltage source to the input terminals and the load to the 9V output; reversing the connections will prevent operation because a buck converter only steps voltage down.
The glue-craft sealing is moisture-proof and dust-proof, so no routine servicing is required unless the unit is physically damaged.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?