Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 10-32V DC to dual USB 5V/9V QC 3.0 with 2.5A per port and over-voltage protection
The GCON dual USB buck converter steps down DC input from 10 to 32 volts to a 5 volt default output, switching up to 12 volts when quick charge is triggered. Each port delivers a rated 2.5 amps and 30 watts, supporting QC 2.0, QC 3.0, MTK PE 1.1 and 2.0, AFC, FCP and SFCP protocols. Built-in output over-voltage protection and an input fuse guard connected devices.
This board suits installers adding fast-charge USB ports to 12 or 24 volt vehicle systems, solar setups or custom DC distribution panels. It is not for mains-voltage appliances, laptop charging beyond 30 watts per port, or builds that require isolated output or programmable voltage steps outside the automatic quick-charge range.
The 2.5 amp, 30 watt per port limit decides whether the adapter can power your device at full quick-charge speed. Check your device’s peak draw; if it exceeds 30 watts on a single port, the converter will not sustain maximum rate.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Any DC supply between 10 V and 32 V — such as a 12 V car battery, a 24 V industrial rail or a bench supply set within that window — will power the module.
Yes. The output defaults to 5 V and only steps up to 9 V after a quick-charge handshake, so legacy devices draw 5 V at up to 2.5 A per port.
Connect a USB load tester or a device with a built-in current meter; each port should show up to 2.5 A at 5 V (or 9 V when quick charge is active) without triggering the over-voltage protection or blowing the input fuse.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?