Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of ten step-up modules converting 3.0–30 V input to adjustable 5–35 V output at up to 4 A
This pack contains ten XL6009 step-up converters designed for hobbyists and engineers who need adjustable voltage from low-voltage sources. Each module accepts a DC input between 3.0 V and 30 V and delivers a continuously adjustable output from 5 V to 35 V at up to 4 A. The XL6009E1 core chip operates at 400 KHZ, offering higher efficiency than older LM2577-based designs.
The ultra-compact PCB fits tight enclosures and breadboard layouts, making it suitable for custom power supplies or temporary outdoor setups. Output voltage is set by turning the blue trimpot with a mini screwdriver; one full turn changes the voltage by roughly 1 V. Connections are made through solder pads, so builders must provide their own wiring and heatsinking for sustained loads.
At 400 KHZ the module runs cooler than legacy converters at comparable current, reducing the need for large heatsinks in intermittent use. Under continuous 4 A output the board will warm noticeably, so forced airflow or a small heatsink is advisable for enclosed projects. No fan or active cooling is included, and the non-isolated topology requires careful grounding when chaining multiple units.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The module accepts DC 3.0 V to 30 V input, with an optimum working range of 5 V to 30 V.
A slotted screw on the blue trimpot adjusts output voltage continuously from 5 V to 35 V; one full turn changes voltage by about 1 V.
Connect a multimeter to the output, then turn the trimpot counter-clockwise to raise voltage or clockwise to lower it while watching the meter until the desired level is reached.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?