GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
Splits one PWM header into four fan connectors while drawing power directly from a Molex source
- Cable length1.37 ft (0.42 m)
- Connector count6
- Connector details4 × 4 Pin PWM Header 1 × 4 Pin PWM Connector 1 × 4 Pin Molex
- Product typeCable Kits
- Product colorBlack
- Overall length16.54 in (42 cm)
- Connect 4 PWM fans from one CPU header
- 37 ft cable reaches across the case
- Direct PSU power via 4-pin Molex header
- 54 inch total length for tidy routing
- Black sleeving matches dark-themed builds
Connect Four PWM Fans From One Header
This 1-to-4 PWM splitter lets you run four 4-pin fans from a single motherboard header while drawing extra power through a 4-pin Molex connector. It is designed for builders who need more fan connections than their board provides without losing PWM speed control.
Power Delivery And Signal Integrity
The cable routes the PWM signal from the motherboard to all four fan headers so speeds stay synchronised, while the Molex link supplies the current needed for multiple fans. Total length is 16.54 inches, giving enough reach for typical chassis layouts without excess slack.
Simple Installation With Included Connectors
The kit supplies one 4-pin PWM input, four 4-pin PWM outputs and one 4-pin Molex power connector in a black sleeve. No software or adapters are required; buyers who need fan-speed reporting from every individual fan or who want addressable RGB control should look elsewhere.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | GELID Solutions |
| Model name | CA-PWM-03 |
| Product type | Cable Kits |
| Product color | Black |
| Ports & slots | |
| Connector count | 6 |
| Connector details | 4 × 4 Pin PWM Header 1 × 4 Pin PWM Connector 1 × 4 Pin Molex Header |
| Size & build | |
| Overall length | 16.54 in (42 cm) |
| Cable length | 1.37 ft (0.42 m) |
| Shipping weight | 0.03 kg |
| Package size | 224 × 84 × 3 mm |
Questions about this item
How do I install the CA-PWM-03 splitter and which connection is often missed?
Plug the single 4-pin PWM connector into the motherboard CPU fan header, attach up to four fans to the four 4-pin PWM headers, then connect the 4-pin Molex header to a PSU Molex lead; the Molex link is the step most builders forget.
What maintenance or replacement will the CA-PWM-03 need over time?
No scheduled maintenance is required; inspect the black 1.37 ft cables and six connectors occasionally for dust or loose pins, and replace the whole splitter only if a header becomes damaged or intermittent.
What limit appears first when running four fans continuously on the CA-PWM-03?
The combined current draw of all four fans must stay within the motherboard PWM header and PSU Molex connector ratings, so total fan amperage is the practical ceiling under sustained load.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





