GIGABYTE B343-C40-AAJ3 barebone server 3U 10-node 20-bay
3U barebone chassis holds ten single-socket nodes, each supporting AMD EPYC 4005 or Ryzen 9000 CPUs, dual-channel DDR5 ECC memory, two 2.5-inch Gen5 NVMe/SATA bays, one M.2 slot.
- 10 nodes in a single 3U chassis
- Dual 25GbE LAN per node via Broadcom BCM57502
- Two 2.5" Gen5 NVMe/SATA bays per node
- DDR5 ECC UDIMM support with four DIMM slots per node
- FHHL PCIe Gen5 x16 slot and OCP NIC 3.0 slots per node
3U 10-node barebone server
The GIGABYTE B343-C40-AAJ3 is a 3U rackmount barebone that houses ten independent compute nodes in a single chassis. Each node accepts a single AMD EPYC 4005 or Ryzen 9000 series processor for single-socket workloads. The system targets density-focused deployments such as virtualisation hosts, HPC clusters or multi-tenant edge platforms. Buyers who need dual-socket nodes or more than ten nodes per 3U will need a different platform.
Gen5 NVMe/SATA and PCIe Gen5 x16 per node
Every node provides two 2.5-inch bays that support Gen5 NVMe or SATA drives, plus one M.2 slot with a PCIe Gen3 x1 link. A single full-height half-length PCIe Gen5 x16 slot is available per node for accelerators or additional networking. The three shared OCP NIC 3.0 slots operate at PCIe Gen4 and serve multiple hosts simultaneously. Builders requiring more than two front drives per node or PCIe Gen5 on the OCP slots cannot use this chassis.
Front-access service and 25GbE networking
All ten nodes and twenty drive bays are accessible from the front, allowing hot-swap maintenance without pulling the chassis from the rack. Each node integrates dual 25GbE ports via the Broadcom BCM57502 controller for high-throughput east-west traffic. Four DDR5 ECC or non-ECC UDIMM slots per node support memory capacity tuned to the chosen CPU. Operators who prefer rear service access or need onboard Baseboard Management Controller ports should verify the specification sheet.
How it compares
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
- Price $9,645.99
- Pricier than about 87% of the 532 comparable items (median $2,503.49).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 50.00 kg |
| Package size | 770 × 447 × 132 mm |
Questions about this item
Should I choose the EPYC 4005 or Ryzen 9000 processor for my node?
Each node accepts a single AMD EPYC 4005 or Ryzen 9000 series processor; EPYC targets server workloads while Ryzen 9000 suits high-frequency tasks.
What does the 25Gb/s LAN figure mean for actual throughput per node?
Two 25Gb/s ports via Broadcom BCM57502 give each node up to 25 gigabits per second per port for high-speed networking.
How does the PCIe Gen5 x16 slot limit the expansion cards I can install?
The full-height half-length slot runs at PCIe Gen5 x16, capping add-in cards to that bandwidth and physical size.
More in Barebone Servers & DIY Kits
Similar items
ASUS RS720A-E13-RS8G-32KW10G-EPYC-9655 barebone server EPYC 9655 96-core 2.60 GHz 256GB DDR5 960GB SSD
- EPYC 9005 Series
- 2U Rackmount
GIGABYTE R184-S90-AAV1 barebone server 1U dual Xeon 6 4-bay Gen5 NVMe/SATA/SAS-4 32 DIMM
- Xeon 6 Processors,…
- 1U Rackmount
ASUS ESC8000-E12P-32W barebone server 4U dual Xeon 6 32× DDR5 8× NVMe 3200W
ASRock Rack 4U60L8E-GENOA/2T barebone server 4U 60-bay 800W
- EPYC 9005 & 9004 Se…
- 4U Rackmount
DELL ME5012 12-bay 3.5" barebone server, dual-control, 580W redundant, rails, iSCSI
- None (Storage devic…
- None (Storage devic…





