Gikfun
Gikfun EK1725 2" 4Ohm 3W Speaker Pack of 2
Two 2-inch 4-ohm 3-watt full-range woofers for DIY audio and Arduino projects
- Channel configuration2.0
- Connection typeWired
- Total wattage3 W
- RMS power per satellite3 W
- Driver unitDynamic driver
- Frequency range0 unknown modifier
- Pack of two speakers simplifies stereo builds
- 4 ohm impedance matches common amplifier outputs
- 3 W rated power drives small enclosures
- 2 inch diameter fits compact project cases
- 77 dB output level suits close-range listening
Compact 2-Inch Arduino Speaker Pair
This pack supplies two 2-inch 4-ohm 3-watt full-range drivers intended for hobbyists building Arduino audio projects or repairing small Hi-Fi equipment. The wired 2.0 configuration suits breadboard experiments and permanent solder-in installations alike.
Steady 3-Watt Output With Bass Boost
Each driver delivers a continuous 3-watt RMS rating so extended playback does not trigger thermal compression the way a short burst rating would. The integrated bass-boost feature reinforces low frequencies down to the 190-hertz resonance point while the 77-decibel sensitivity keeps output consistent during long listening sessions.
4-Ohm Impedance Matches Low-Voltage Boards
The 4-ohm load is the critical specification because it allows direct connection to typical 1.5-volt to 6-volt Arduino supply rails without an external amplifier stage. Builders needing higher power or a different impedance must select another driver.
How it compares
Measured against everything we stock in Desktop Speakers & Soundbars, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 82% of the 830 comparable items (median $40.99).
Specifications
| Product | |
|---|---|
| Brand name | Gikfun |
| Model name | EK1725 |
| Product type | Woofer |
| Product color | Silver |
| Audio & video | |
| Channel configuration | 2.0 |
| RMS power per satellite | 3 W |
| Driver unit | Dynamic driver |
| Frequency range | 0 unknown modifier |
| Rated impedance | 4 ohm |
| Ports & slots | |
| Connection type | Wired |
| Power | |
| Total wattage | 3 W |
| Size & build | |
| Measurements | 2.79 in × 11.43 in × 6.35 in |
| Product weight | 0.132 kg |
| In the box | |
| In the box | 2 x Speaker |
| More details | |
| Control method | Voice |
Questions about this item
How much heat or noise does a 3 W, 4 ohm driver produce when run continuously?
At 3 watts RMS the drivers stay cool and silent; there is no fan or amplifier inside the speaker itself.
What external amplifier or wiring must I already have to drive these 4 ohm, 3 W speakers?
You need a 4 ohm-capable amplifier or microcontroller board with speaker outputs, plus two-conductor wire for each unit.
Will these 2 inch, 190 Hz resonance speakers work alongside the 3 inch, 20 W model listed in the same range?
Yes, both share 4 ohm impedance so they can run from the same amplifier, but the larger unit handles more power and plays lower.
More in Desktop Speakers & Soundbars
Similar items
Creative Labs 51MF8415AA000 Katana SE Soundbar 180W Bluetooth 5.0
- 2 × 109 mm (4.3 in)…
- 55 Hz - 20 kHz
Creative Labs T100 2.0 Bluetooth 5.0 speaker 51MF1690AA002
- Wired with Bluetoot…
- Black





