GLOTRENDS UEX103 600mm PCIe 3.0 X1 to X4 riser cable
A 600 mm cable that extends a covered PCIe X1 slot outward and converts it to an X4 connector while keeping PCIe 3.0 X1 bandwidth
- Extends a blocked PCIe X1 slot up to 23.6inch for flexible card placement
- Low-profile 6mm male connector fits beneath most graphics cards without clearance issues
- Converts X1 lane to X4 physical slot for WiFi 6E, M.2 or sound cards
- PCIe 3.0 X1 bandwidth delivers up to 1000 MB/s, matching onboard performance
- 600mm round cable twists freely and includes insulating foam base for secure mounting
Reclaim blocked PCIe X1 slots
This GLOTRENDS UEX103 riser extends a motherboard PCIe X1 slot by 600mm and presents a PCIe X4 connector for add-in cards. It suits builders whose graphics card covers the adjacent X1 slot and who need to install a WiFi 6E card, M.2 PCIe adapter, Firewire controller, USB expansion or sound card in a more accessible location.
Low-profile fit and flexible routing
The male connector measures only 6mm high, allowing installation in the tight gap beneath most oversized GPUs. A 23.6inch round cable can be twisted to any angle, while an insulating foam base lets the female end be secured with self-adhesive tape at virtually any orientation inside the chassis.
Bandwidth limits and upgrade fit
The link operates at PCIe 3.0 X1 speeds up to 1000MB/s, dropping to 500MB/s on a PCIe 2.0 X1 slot. This cable will not bottleneck a WiFi 6E card rated at 675MB/s, but an M.2 PCIe 3.0 X4 SSD will be limited to X1 throughput. It replaces a direct motherboard slot when physical clearance, not bandwidth, is the constraint.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the UEX103 riser when only 6mm of clearance exists under the graphics card?
Slide the low-profile male connector into the motherboard PCIe X1 slot — it fits in 6mm of space — then route the 600mm round cable to the desired location and secure the female end with self-adhesive tape on its insulating foam base.
What maintenance or replacement will the UEX103 cable need over time?
The cable has no moving parts or consumable components; simply reseat both connectors if the system becomes unstable after transport or thermal cycling.
At what point does sustained throughput hit the hard ceiling on this riser?
Bandwidth is capped at PCIe 3.0 X1 (~1000 MB/s); a PCIe 2.0 X1 slot lowers the ceiling to ~500 MB/s, and an M.2 PCIe 3.0 X4 SSD will be limited to X1 speeds.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





