SAMA Q70-BKWAYNO3-G 360mm liquid cooler with 2.8" LCD display
- Intel&AMD
- AMD:AM5/AM4
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two silver G1/4" compression fittings connect 3/8" ID, 1/2" OD soft tubing with embedded O-ring seals for leak-free liquid cooling loops
This pair of silver compression fittings connects 3/8" ID, 1/2" OD soft tubing to a standard G1/4" thread in a custom water-cooling loop. They are built from brass and copper with a chrome finish for corrosion resistance. The set suits builders assembling a new loop or extending an existing one. Each fitting weighs 1.76 ounces and measures .86 x .7 x .86 inches.
The G1/4" UN thread is the only interface these fittings accept, so every block, radiator or pump port must match that pitch. Tubing must be exactly 10 mm inner diameter by 13 mm outer diameter (3/8" ID, 1/2" OD); larger or smaller hose will not seal. No adapter for other thread sizes or hose dimensions is included. The embedded O-ring provides the sole sealing surface, so surface finish on the mating port matters.
Installation is a simple hand-tighten of the knurled collar onto the tubing and thread; no special tools are required. The most common issue is under-tightening, which leaves a microscopic weep path under pressure. Over-tightening can deform the soft tube and also cause leaks. The manufacturer stresses a full loop pressure test before powering the system to catch any seal failures.
Measured against everything we stock in Liquid Cooling & AIO Coolers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | GreenDracaena |
| Product line | Soft Tube 1/2 in OD (Silver) |
| Model name | D-SoftG14MM-group |
| Part number | D-RGKN-B38-Silver-2 |
| Product color | Silver |
| Ports & slots | |
| Fan plug type | G1/4 in |
| Size & build | |
| Radiator size | 2 pcs |
| Fan size | 2 pcs |
| Cooling block material | Brass, Copper |
| Radiator material | Brass, Copper |
| Fan dimensions | 0.86 in x 0.7 in x 0.86 in |
| Tubing material | Brass, Copper |
| In the box | |
| In the box | O-rings |
| More details | |
| LED lighting | Soft Tube 1/2 in OD (Silver) |
The product is sold as a two-piece pack; buy multiple packs if your loop needs more than two connection points.
Each fitting measures 0.86 in long by 0.86 in wide by 0.7 in thick, so it adds that much length and bulk to every tube run.
It accepts soft tubing with 3/8 in inner diameter and 1/2 in outer diameter (10×13 mm), sealing with the included O-rings.
More in Liquid Cooling & AIO Coolers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?