HANNORD DisplayPort 2.1 cable 6.6 ft 80 Gbps
Connects DisplayPort 2.1 devices at 80 Gbps for 16K@60Hz, 8K@120Hz or 4K@240Hz with HDR10 and DSC over 6.6 ft double-braided cable
- Product colorBlack
Cable Length 6.6 Feet
- 5 Feet$10.99
- 6 Feet$11.99
- 6.6 Feet$14.99
- 10 Feet$14.99
- Supports 16K resolution at 60 Hz via 80 Gbps bandwidth
- Handles 8K at 120 Hz and 4K at 240 Hz for high-refresh gaming
- Double nylon braid survives 10,000-plus bend cycles
- Aluminium alloy shell improves heat dissipation during sustained use
- Backwards compatible with DisplayPort 1.4, 1.3, 1.2 and earlier versions
HANNORD DisplayPort 2.1 cable 6.6 ft 80 Gbps
This new HANNORD DisplayPort 2.1 cable runs 6.6 ft and carries 80 Gbps total bandwidth over four UHBR20 lanes. It meets the DP 2.1 specification and remains backwards compatible with DisplayPort 1.4, 1.3, 1.2 and earlier versions. The double nylon braided jacket and aluminium alloy shells are rated for over 10,000 bend cycles.
For 16K, 8K high refresh or dual 4K 144 Hz setups
Builders driving a single 16K display at 60 Hz, an 8K panel at 120 Hz or two 4K monitors at 144 Hz uncompressed will use the full UHBR20 link. Systems limited to HBR3 or earlier DisplayPort versions cannot reach these modes, so the cable would operate at the lower standard instead. Buyers whose monitors and graphics cards top out at 4K 60 Hz do not need this bandwidth.
80 Gbps UHBR20 bandwidth decides the fit
The cable delivers 80 Gbps through UHBR20 signalling across four lanes, enabling 16K at 60 Hz with DSC, 8K at 120 Hz and dual 4K at 144 Hz without compression. If the source and sink both support UHBR20 the link runs at full speed; otherwise it falls back to the highest rate both ends share. No other spec in the data changes that outcome.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 60% of the 3,801 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Other versions of this model
3 more in the same range
Questions about this item
Does the 6.6 ft DisplayPort 2.1 cable generate noticeable heat during all-day 16K@60Hz use?
The aluminum alloy casing is designed for better heat dissipation during sustained high-bandwidth operation.
Must my graphics card have a native DisplayPort 2.1 output to use this cable?
It works with RTX 40/30/20 series, GTX 16/10 series, GeForce 900/700 series, and Radeon RX 7000/6000/5000/Vega/500/400 series cards.
Will this cable work with my older DisplayPort 1.2 monitor at 4K@144Hz?
Yes, it is backwards compatible with DisplayPort 1.2 and supports 4K@144Hz on that standard.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-10 displayport cable 10 ft 1.4 HBR3 32.4 Gbps 8K 60Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Chopmate VESA Certified DisplayPort 1.2 Cable 6.6ft 4K 60Hz 2K 165Hz Gold-Plated Nylon Braided
Omni Gear DP-10-HDMI 10 ft DisplayPort cable
- 10 ft (3.05 m)
- DisplayPort to HDMI
QVS DPHD-06 DisplayPort to HDMI cable 6 ft 1920 x 1200
- Consumer Electronics
Tripp Lite P582-020 DisplayPort to HDMI cable 20 ft 1080p
- 20 ft (6.1 m)
- DisplayPort to HDMI








