Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts dual SATA 15-pin power connectors to a single PCIe 8-pin (6+2) graphics card connector using 18AWG wire over 20cm length
This 20 cm cable converts two 15-pin SATA power connectors into a single PCIe 8-pin (6+2) plug for a graphics card. It targets builders whose power supply lacks native 8-pin leads or who are running multiple cards on one unit. The 18 AWG wires handle the combined 12 V current required by high-end GPUs. A single SATA connector cannot supply enough amperage on its own.
Plug both SATA ends into separate peripheral cables from the PSU; using only one STA connector risks melting the wire or tripping protection. Route the short 20 cm length carefully so the stiff 18 AWG cable does not strain the GPU socket. Verify that the 6+2 segment matches your card’s 8-pin or 6-pin requirement before seating it firmly. Do not daisy-chain additional adapters on the same rail.
Confirm the PSU has at least two unused SATA power leads on independent cables if possible. Ensure the unit’s 12 V rail rating can sustain the graphics card’s total draw through this adapter. The cable adds no voltage regulation, so the PSU must already deliver stable 12 V power. Buyers needing longer reach or a single-cable solution should look elsewhere.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Check that the card powers on without shutdowns under load and that the 15-pin SATA connectors stay firmly seated in the PSU.
The package includes one 20 cm cable with dual 15-pin SATA plugs and an 8-pin (6+2) PCIe plug; you must provide a PSU with two free SATA power ports.
The single 20 cm 18AWG model with dual 15-pin SATA connectors is built to supply the required 12 V current for such cards.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?